Axel Wirth Maschinen Glue Applicator, Oil Applicator,
Lacquer Applicator, Gluing Machine
     
          under construction
 

 

  
    Wood -
no other material is so
vibrantly beautiful.

   

A lovely example of the versatility and
expressiveness of wood as a crafting material:
a life-sized sculpture of Saint Barbara
carved from the still rooted trunk
of a Swiss stone pine.

Would you like to see more carved figures?

Click here

   Oiled wood ideally demonstrates the beauty of its own structure.

Pliable roller application with infinitely variable roller pressure deepens the penetration of oil into the wood. Steady and infinitely variable dosage of high-grade oils and liquid waxes creates the most beautiful surfaces.

Since 1996, we have been using the
LW 100 and LW 120 roller applicators
with custom-designed rollers to oil and wax wood
on one or two sides.



Infinitely variable oil quantity thanks to special rollers from 6 – 23 g/m² and 15 – 70 g/m².
For smooth woods, the roller is not the same as for brushed, structured woods.

For oil application on chamfers, Axel Wirth offers a special programme.

Regular oil application on native wood surface. Avoiding speckles or even splashing such as occur during application by hand. Machines are used by craftsmen and in furniture production not just because of the wood quantity, but because of the regularly oiled wood surface.

Disk diameter of 635 mm for furniture production.

In general, surfaces are wiped, softly brushed or polished at once or some time after application. This is called excess distributing. For floor board/parquetry production, a combination of roller applicator, with application from the top, conveyor belt and above mounted distributor heads with 400 mm width. Disk brushes and round pads for further treatment of the oiled surface.

Disk diameter of 640 mm for furniture production.

For oil application, all sizes of the “WIRTH” Roller Applicator LW 100 and LW 120, fitted with rollers developed by Wirth, are suitable. Others are using UV-oil instead of natural oil. Then appropriate UV-lamps are installed over the last piece of the distributor conveyor.

Some of our customers heat the woods before surface treatment in a continuous operation.

 
 
Introduction to oil applicator

   Oil application on floor boards

LW 100
for oil / wax application with conveyor belt
and polishing unit

  



Distributor – Conveyor
Up to 4 heavy aggregates with disk brushes
and disk pads can be installed successively.
100 – 450 r/min.
 
Oil application and distribution, polishing
of plane surface and chamfers. 		 

Brushing machine, distributor,
polishing machine.

Any brush and pad can be quickly exchanged.
 
Oiling of furniture parts, distribution with disk pads, hardening

   Oiling of noble floor boards by dosing roller machine type DWO
 

Chamber drier for oiled woods


  
Magazine for pieces of wood
 
oil application on smoked floor board

   oil application on kitchen working plate


 

Heating zone with oil applicator and conveyor belt

 

  In our workshop, we also demonstrate a UV-dryer for UV-oils on floorboards and parquets.
 

In several countries there is a demand for high-gloss hard wax oil
on floor boards.

 

 

 

 

 

 


wooden tiles

front wood bamboo
  
front wood veneer
 
       
       
      2 User online
[ DESIGN: WBK ]